CONSERVATION
Why conserve?
Water is fundamental to life, yet is often taken for granted. By using water wisely today, we can reduce costs and environmental impacts while ensuring that future generations have the same access to clean water that we enjoy.
The process of turning water into safe drinking water costs money due to the sophisticated processes, infrastructure, facilities, and chemical and electrical costs required to deliver this valuable product to homes.
That’s why people should use water more carefully in and around the home. Being WaterWise benefits the environment and allows us to defer expanding our water facilities – saving residents added expense.
Check out Lakefront’s Water Conservation Newsletter for more tips and tools to help you conserve water at home.
Check for Leaks!
As a courtesy, Lakefront Utility Services Inc. informs customers when a leak may be detected. You may receive a call from Lakefront informing you when our system has detected a leak.
How did Lakefront determine that you have a leak?
Leak detection is based on the total number of 15-minute periods of recorded consumption in the previous 24-hour period from when your meter was last read.
- Intermittent Leak – 60 to 95 15-minute periods of recorded consumption
- Continuous Leak – All 96 15-minute periods show water consumption.
Water Service Pipe Leak
A continuous leak from a hole in a water service pipe can waste water in the amounts shown below:
Size of Hole | Amount of Water Wasted |
1/16″ hole | Wastes 3.57 m³ (3,570 litres) in 24 hours |
1/8″ hole | Wastes 14 m³ (14,000 litres) in 24 hours |
3/16″ hole | Wastes 32.13 m³ (32,130 litres) in 24 hours |
Toilets
A leaky toilet can waste up to 20 cubic metres a day or more than 600 cubic metres in a month.
Reduce
- Replace old toilets with more efficient low flow toilets and save money and water with every flush.
- Check for leaks. Wait 5 minutes after the last flush cycle and then add a few drops of food colouring or a cooled cup of black coffee to the water in the tank and wait 10-15 minutes. Do not flush. If the colour appears in the bowl, your toilet has a leak that should be repaired immediately.
Repair
- Possible sources of a leak include: the flapper valve and valve seat could have deteriorated or corroded; the flushing arm and lift chain are not working properly; the water level in the tank is too high and spills into the overflow tube; and/or the float rod, ballcock or float ball are corroded.
- Replacement parts are available at hardware and plumbing supply stores.
- Consult your local plumbing professional.
Bathrooms
Reduce
- Turn off the tap when brushing your teeth, shaving or washing your hands. Fill the sink with a few centimetres of warm water to wash or rinse your razor while shaving. For brushing, fill a glass with water to rinse your mouth
Repair
- Check for leaks – To check for leaks in your toilet, add a few drops of food colouring or a cooled cup of black coffee to the water in the tank and wait a few minutes. If, without flushing the toilet, the colour appears in the bowl your toilet has a leak that should be repaired immediately.
Retrofit
- Showerheads – Older showerheads can use about 20L of water every minute. Replace your older showerhead with a new low-flow showerhead and save water and money. Look for a showerhead that uses 9.5L per minute or less.
- Taps – Faucet aerators can reduce water use by 25 per cent. Replace your older aerator with a new low-flow aerator and save water and money.
- Toilets – Older toilets use about 20L of water per flush. The Ontario Building Code requires 6L low-flow toilets for new construction and 13L toilets for renovations.
- There are many products that you can install in the tank of an existing water-guzzling toilet to reduce the amount of water used, such as a water displacement (plastic bag or bottle), water retention (toilet dams) or alternative flushing (early closure or dual-flush). Check with your local plumbing supply of hardware store to find which method will work best for your toilet.
- Don’t put rocks or bricks in your toilet tank as these can breakdown over time and cause damage. Or replace your water-guzzling toilet with a low-flow 6L version, a 3L/6L dual flush, or high efficiency 4L flush toilet – that’s 1/5 the volume of water per flush (and 1/5 the cost!).
Kitchens and laundry
Reduce Your Costs & CO2
- Turn off the tap – For a cold glass of water, keep a jug in the fridge instead of running the tap.
- By hand – To wash dishes by hand only fill the sink one-quarter to half full. Rinse using a second, one-quarter to half-full sink and avoid running the water.
- Steamed not boiled – Steaming food uses less water, less energy and helps to retain nutrients.
- When boiling, use only enough water to cover the food and use a tight-fitting lid.
- To the top – Always wash full loads for greatest water and energy savings or adjust the water level to the amount of laundry to be washed.
- Wash clothes in cold water. Most Canadians still wash their laundry in warm water, which costs more money and takes a toll on the environment. Approximately 75 percent of the total energy use and greenhouse-gas emissions produced by a single load of laundry come from warming the water itself.
Repair
- Check for leaks – regularly check taps and pipes. Prompt repairs can save water, money, and prevent potentially costly property damage. Stop drips and save dollars – faucet washers cost pennies and take minutes to install.
Retrofit
- Taps – Faucet aerators can reduce water use by 25 per cent. Replace your older aerator with a new low-flow aerator and save water and money.
- Front and centre – Top-load washing machines have agitator arms that generally reduce the size of load that can be washed. Front-load washers do not have agitator arms, and are more gentle on clothes. Wash larger loads and remove more water during the spin cycle to reduce drying time.
- Spotted – When purchasing a new appliance spot the Energuide sticker and check the rating to determine energy efficiency and potential savings.
Driveways, cars and sidewalks
Did you know? One drop of oil can render up to 25 litres of water unfit for drinking.
Reduce
- Clean sweep – Use a broom to clean driveways, sidewalks and patios, instead of the hose. Let the rain take care of the rest.
- Turn off the tap – Use a bucket and sponge to wash your car and a trigger nozzle on the hose to wet and rinse.
- Suds away – Use a car wash facility that recycles its water and collects and separates out greases and oils.
Repair
- Check for leaks – Regularly check connections and hoses for leaks. Prompt replacement of an inexpensive washer could save water, money and possibly prevent costly property damage.
- A leak of only one drop per second wastes about 10 000 litres of water annually.
Retrofit
- Trigger change – Use a trigger nozzle on a hose to stop the flow of water when not in use.
Pools and hot tubs
Reduce
- Cover up – Covering your pool or hot tub when it’s not in use will reduce energy costs, evaporation and the amount of water required for top-up.
- Turn off the tap – Lower water level in your pool or hot tub to reduce water loss due to splashing. Pools should only be filled to 15 to 20 cm from the top.
- Back off on backwashes – Limit backwashes to one to two minutes or until the water becomes clear. Longer backwashes waste water and chemicals.
Repair
- Check for leaks – Regularly check connections, liners, and pipes for leaks, prompt repair could save water, money and possibly prevent property damage.
- A leak of only one drop per second wastes about 10 000 litres of water annually.
- Get the dirt out – Check the pump strainer basket and the skimmer basket daily and remove any debris. This can improve water circulation and result in cleaner water.
Retrofit
- Pre-screen – Consider adding a pre-filter to the skimmer basket, this may reduce the frequency of backwashes to three or four times per season.
LOCATION
207 Division Street
PO Box 577
Cobourg, Ontario
K9A 4L3
Call Us
(905) 372-2193
FAX US
(905) 372-2581